1. Premium shielded 400 MHz magnet
2. 2 channel console
(1) Channel 1 : Highband with 1H/19F observe 50 watt
(2) Channel 2 : Broadband observe 300 watt
3. 1H-19F/15N-31P 5mm One probe
4. Auto-Sampler for 12 samples

Spectral Range : 8,300 ~ 350cm-1 (KBr), 6,500 ~ 550 cm-1 (ZnSe) /Resolution : 0.5cm-1 /S/N Ratio : 50,000 : 1 /Wavenumber Precision : Better than 0.01cm-1 /ATR(diamond crystal)

Dual Monochromator
– Cisbio HTRF certified
– Plate format : 6 12 24 48 96 384 wells
– Light source : Xenon flash lamp (1 joule/flash)
– Detector : Two PhotoMultiplier Tubes(for fluorescence and luminescence separately)Photo diode(for absorbance)

1) Autofucus : Precalibrated focus for any zoom setting or sample height
2) Detector : Supercooled CCD
3) Image resolution : 4 megapixels
4) Pixel size(HxV) : 6.45×6.45um
5) Cooling system : Peltier
6) Camera cooling temperature : -30℃ absoluted and regulated
7) Filter holder : 6 positions(5 for filters 1 without filter for chemiluminescence)
8) Emission filters : 1 included(standard) 4 optional
9) Excitation source : Trans-UV(302nm included with 254nm and 365nm available as options)
10) Illumination control : 8 modes available

– Four channel simultaneous data acquisition giving a mult-angle analysis of sample
– Select from two internally generated signals – CD FDCD ORD LD UV Fluorescence
– Temperature and two external channels (eg. pH)

A Digital Melting Point Apparatus has been designed for general purpose laboratory use in which solid samples submitted for analysis are enclosed in a glass capillary tube and brought to a melt point condition under controlled parameters of time and temperature. Samples in 3 capillary tubes may be viewed simultaneously. Digital microprocessor with ±0.1°C resolution provides fast warm-up and accurate temperature control. Push button controls are conveniently located to ensure that temperatures can be recorded without looking away from the sample and Membrane keypad with simple menus for intuitive use.

An OPTIZEN POP-V is single-beam type spectrophotometer and is designed for general quantitative analysis in visible region, with wavelength range 340 to 1100 nm, high accuracy, good stability. It can measure automatically lots of samples by using 7 Multi Cell. Easily and quickly call up the information that is being measured or analyzed by registering it in you favorites. Link it with PC by using OPTIZEN VIEW.

An pH meter is a scientific instrument that measures the hydrogen-ion activity in solutions, indicating its acidity or basicity (alkalinity) expressed as pH value. It can start measurement or calibration with a simple operation and switch between both modes.